Publications

Recent publications in Journals and Book Chapters
Name Title Info
Katsourinis, D.I., Kolaitis, D.I., Founti, M.A.  “Comparative Assessment of Eulerian versus Lagrangian Modelling of Turbulent Evaporating Sprays in a “Stabilized Cool Flame” Reactor Numer. Heat Transfer, Part B: Fundamentals, 2007
D. Giannopoulos, D.I. Kolaitis, A. Togkalidou, G. Skevis and M.A. Founti  “Quantification of Emissions from the Co-Incineration of Cutting Oil Emulsions in Cement Plants – Part II: Trace species” Fuel, Volume 86, Issue 16, November 2007, Pages 2491-2501
D. Giannopoulos, D.I. Kolaitis, A. Togkalidou, G. Skevis and M.A. Founti  “Quantification of Emissions from the Co-Incineration of Cutting Oil Emulsions in Cement Plants – Part I: NOx, CO and VOC”.  Fuel, Volume 86, Issues 7-8, May 2007, Pages 1144-1152
D.A. Kontogeorgos, E.P. Keramida, M.A. Founti,  “Assessment of simplified thermal radiation models for engineering calculations in natural gas-fired furnace” International Journal of Heat and Mass Transfer 50 (2007) 5260–5268
Founti, M., Zannis, G., Makris, Panagiotis,  Power aspects of a horizontal ring mill pulverizer under continuous comminution of olivine International Journal of Mineral Processing (2007)
Kolaitis, D.I. and Founti, M.A. “A tabulated chemistry approach for numerical modelling of diesel spray evaporation in a “stabilized cool flame” environment” Combustion and Flame, vol. 145, pp. 259–271, 2006
Kolaitis, D.I. and Founti, M.A. “Numerical modelling of transport phenomena in a diesel spray “stabilized cool flame” vaporizer” Combustion, Science and Technology vol. 6, Issue 178, 2006
Kolaitis, D. & M. Founti “Modeling of the gas-particle flow in industrial classification chambers for design optimization” Powder Technology, Vol.125, pp. 298-305, 2002
Liakοs, H., M. Fοunti, & N. Markatοs “Modeling the Characteristic Types and Heat Release of Stretched Premixed Impinging Flames” Cοmputatiοnal Mechanics, Vol. 67, pp. 88-96, 2001
Liakos, H.H., Founti, M. A. and Markatos N.C. “Modeling of stretched natural gas diffusion flames” Applied Mathematical Modelling, vol. 24, issues 5-6, pp.419-435, May 2000.
Keramida, E.P., Liakos, H.H., Founti, M.A., Boudouvis, A.G. and Markatos N. C. “Radiative heat transfer in natural gas-fired furnaces” Intern. Journal of Heat and Mass Transfer, vol. 43, issue 10, pp.1801-1809, 15 May 2000
Spitas, V., Makris, P. and Founti, M. “A novel dry pulverizer for low cost production of powders”  accepted for publication in Particulate Science and Technology An International journal, 2000.
Liakos, H.H., Founti M.A. and Markatos N.C. “The relative importance of combustion mechanisms in industrial premixed flames under high pressure” accepted for publication in Applied Thermal Engineering, 2000
Keramida, E.P., Liakos, H.H., Founti, M.A., Boudouvis, A.G. and Markatos N. C. “The discrete transfer radiation model in a natural gas-fired furnace”,  accepted for publication in Intern. Journal for Numerical Methods in Fluids, 2000.
Liakos, H.H., Founti, M.A. and Markatos N.C. “Energy Savings And Environmental Impacts From Fuel Substitution In Premixed Flame Processes”, 5th Intern. Conference on Technologies and Combustion for a Clean Environment. , Po, July 1999 also accepted for publication in Intern. Journal on Environmental Combustion Technologies, 2000.
Liakos, H.H., Koukou, M. K., Founti, M.A. and Markatos N.C. “Effects of Pressure and Impingement Angle in Flaming Processes  accepted for publication in Canadian Journal of Chemical Engineers, 2000.
Liakos, H.H., Founti, M.A. and Markatos N.C. “Comparison of Energy Resources in Industrial Flames”  accepted for publication in Intern. Journal of Energy Research, 2000
Founti, M, Achimastos T, and Klipfel, A.,  “Effects of increasing particle loading in an axisymmetric, vertical, liquid-solid sudden expansion flow”, Journal of Fluids Engineering, 121, pp. 171–178, 1999.
Founti, M., Giannakopoulos, D. and Klipfel, A. “Erosion wear in bifurcation pipes transporting pulverised coal”, Proc. of 2nd Intern.  Conference on Combustion Technologies for a Clean Environment, Lisbon, 1993, Poster Session 1, 28.5, pp. 34-39, Portugal also in the volume “Selected papers of the 2nd Intern. Conference on Combustion Technologies for a Clean Environment”, edts Carvalho et al., 1998
Founti, M. and Klipfel, A. “Experimental and Computational Investigations of Nearly Dense Two-Phase Sudden Expansion Flows”,  Experimental Thermal and Fluid Science, vol. 17, issue 1-2, pp. 27-36, May 1998
Klipfel, A., Founti , M., Zaehringer, K., Martin, J.P., and Petit, J.P. “Numerical simulation and experimental validation of the turbulent combustion and perlite expansion processes in an industrial perlite expansion furnace”,  Flow, Turbulence and Combustion, 60, pp. 283-300.,1998
Founti M., Achimastos Th., Dimopoulos D. and Klipfel A. “Experimental and computational investigation of particle-particle interactions in a vertical, sudden expansion liquid-solid flow”, Proc. of the 2nd International Conference on Multiphase Flow, Kyoto, Japan, Vol. 3 PT4, pp. 9-18 also in “Selected paper volume of the 2nd International Conference on Multiphase Flow, ’95 Kyoto”, edts Fukano et al., 1997
Founti, M. and Klipfel, A “Prediction of perlite-particle trajectories in vertical expansion furnaces”,  Proc. of the 2nd International Conference on Multiphase Flow, Kyoto, Japan, 1995, Vo.l 3 IA2, pp. 7-13 also in “Selected paper volume of the 2nd International Conference on Multiphase Flow, ’95 Kyoto”, edts Fukano et al., 1997
Doukelis, Α., Founti, Μ., Mathioudakis, Κ. and Papailiou, Κ. “Evaluation of beam refraction effects in a 3D laser Doppler anemometry system for turbomachinery applications”,  Measurement Science and Technology Vol. 7, pp. 922-931, 1996
K. Laskaridis, M. Founti, V. Persikatsis and S. Karantasi,  “Cutting and Treatment of marble with lasers”, (in Greek) Greek Marble, issue 3/96, pp. 98 -101, 1996
Founti, M. and Klipfel, A., “The shear lift effects on the particle motion in two-phase sudden expansion flows”,  accepted for publication in the Trans. of ASME, Journal of Fluids Engineering, 1999 also in Trans. of ASME, Num. Meth. in multiphase flows, Fluids Eng. Div. Summer Meeting, Nevada, USA, FED-vol. 185, pp. 81-92, 1994
Founti, M., Achimastos, Th., Dimopoulos, D. and Klipfel, A. “Effects of increasing particle loading in an axisymmetric, vertical, liquid-solid sudden expansion flow”,  Trans. of ASME, Experimental and Computational Aspects of Validation of Multiphase Flow CFD codes, Fluids Eng. Div. Summer Meeting, Nevada, USA, FED-vol. 180, pp. 83-92, 1994


Refereed in Conference Proceedings
Name Title Info
Tsormpatzis – Tsormpatzoglou N., Giannopoulos, D. and Founti M.  ”Potential of implementing the Solid Oxide Fuel Cell technology for exploitation of landfill gas in Attiki, Greece” “Energy 2007” – 2nd International Exhibition , Athens, Greece
A. Togkalidou, G. Skevis, M. Founti.  Detailed kinetic modelling of C1-C2 hydrocarbon chemistry at moderate temperatures and high pressures European Combustion Meeting 2007, Chania, Greece
Δ. Α. Κοντογεώργος, Ελ. Κραββαρίτης, Ελ. Κεραμίδα, Μ. Α. Φούντη, Κ. Αντωνόπουλος.  “Θερμική συμπεριφορά εσωτερικού κελύφους κτιρίων σε συνθήκες φωτιάς” ΠΥΘΑΓΟΡΑΣ, Συνέδριο για την επιστημονική έρευνα στο Εθνικό Μετσόβιο Πολυτεχνείο, Πλωμάρι Λέσβου, 5-8 Ιουλίου 2007
M. Founti, I. Mandilaras, K. Laskaridis, M. Patronis, M.D. Romero – Sanchez, A. M. Lopez-Buendia “Multi-functional building products based on natural Stone and pcms with stabilised thermal and dynamic load” 7th Conference on Phase Change Materials and Slurries for Refrigeration and Air Conditioning, Dinan, France, 13 – 15 September 2006
D. Kontogeorgos, E. Keramida, M. Founti “Radiative heat transfer modeling of natural gas diffusion flames” Third European Combustion Meeting ECM 2007
Konstantopoulou, P., Giannopoulos D., and Founti, M.  “Multicriteria Analysis Of Hydrogen Production Technologies” Proceedings of the International Hydrogen Energy Congress and Exhibition IHEC 2005, Istanbul, Turkey
Γιαννόπουλος, Δ. και Φούντη Μ. «Ανάπτυξη και εφαρμογή πολυκριτηριακής μεθόδου για την τεχνο-οικονομική αξιολόγηση τεχνολογιών θερμικής αξιοποίησης βιομάζας» 1ο Πανελλήνιο Συνέδριο Μηχανολόγων – Ηλεκτρολόγων, Αθήνα 2005
Λεωνιδόπουλος, Ι., Κολαΐτης, Δ., Γιαννόπουλος, Δ. και Φούντη Μ.  «Συγκριτική αξιολόγηση συστημάτων κυψελών καυσίμου για εφαρμογές στον κτιριακό τομέα» 1ο Πανελλήνιο Συνέδριο Μηχανολόγων – Ηλεκτρολόγων, Αθήνα 2005
Giannopoulos, D. and Founti, M. “Assessment of Biomass Thermochemical Conversion Techncologies through a Novel Synergetic Decision Support Approach combining LCA with Multicriteria Analysis” World Renewable Energy Congress, WREC 2005 Innovation in Europe, Aberdeen, Scotland, 22-27 May 2004
Giannopoulos, D., Tolis, A.J., Redizelas, A., Tatsiopoulos I.P., and Founti M.  “Potentials and Perspectives of Logistics and Multi-criteria Assessment Methodologies for Exploitation of Agricultural Biomass” 2nd World Conference and Technology Exhibition on Biomass for Energy, Industry and Climate protection, Rome, Italy 2004
Hansen, M.W., Founti M, and Giannopoulos D.  “Results from an environmental assessment with a life cycle approach as input to a multicriteria analysis of LIFTOFF gasifiers in Europe” 2nd World Conference and Technology Exhibition on Biomass for Energy, Industry and Climate protection, Rome, Italy 2004
Δ. Κολαΐτης, Δ. Γιαννόπουλος και Μ. Φούντη,  “Αξιολόγηση Μεθοδολογίων Θερμικής Αξιοποίησης Αστικών Απορριμμάτων με τη χρήση Μεθόδων Πολυκριτηριακής Ανάλυσης” αναρτημένη ανακοίνωση για την 4η Διεθνή Έκθεση για την Τεχνολογία Περιβάλλοντος «HELECO ‘03» 2003
Kolaitis, D., Giannopoulos, D., and Founti, M.,  “Development Of A Decision Support Tool For Sustainability Assessment Of Energy Recovery Systems” Proceedings of the International Conference on New and Renewable Technologies for Sustainable Development, Azores, Portugal, paper No 12.1, 2003
Founti, Μ., D. Kolaitis, & D. Katsourinis,  “Particle induced erosion wear in a sudden expansion flow and in a long pipe transporting crude oil” FEDS’01 ASME Fluids Eng. Division Summer Meeting, New Orleans, Louisiana, 2001.
Panidis, Th., Achimastos, Th., Vouros, A. and Founti M. “Theoretical and Experimental Estimation of the Control Volume in LDA and PDA Measurements in Dispersed Two Phase Flows” 9th Workshop on Two-Phase Flow Predictions, Germany, April 13-16, 1999
Makri, A., Founti, M., Makris, P.A.  “Machine Dimensioning Of A Ring-Mill Aiming At Improving Quality And Quantity Of End Product” 12th International Conference On Engineering Design, paper No. 145, Iced 99, Muenich, August 24-26, 1999
Κορωνάκη Ε.Δ., Λιάκος, Χ.Χ. ,Μαρκάτος, Ν.Χ. και Φούντη, Μ.Α Μελέτη Τυρβώδους Ροής σε Πεδία με Απότομη Αύξηση Διατομής 3ο Πανελλήνιο Συνέδριο Χημικών Μηχανικών, Θες/νίκη, Μάιος 1999
Liakos, H.H., Founti, M.A. and Markatos N.C. “Energy Savings And Environmental Impacts From Fuel Substitution In Premixed Flame Processes” 5th Intern. Conference on Technologies and Combustion for a Clean Environment. , Portugal, July 1999
Keramida, E.P., Liakos, H.H., Founti M.A. and Markatos N.C., “Radiative Heat Transfer In An Impinging Jet” Mediterranean Combustion Symposium, the Combustion Institute and the Intern. Centre for Heat and Mass Transfer, Turkey, July 1999
Λιάκος, Χ.Χ., Κούκου, Μ.Κ., Φούντη, Μ.Α. και Μαρκάτος Ν.Χ.  “Μοντελοποίηση Θερμικής Κατεργασίας Επιφανειών με Φλόγες Προανάμιξης” 6ο Εθνικό Συνέδριο του Ι.Η.Τ., Βελτιστοποίηση Ενεργειακών Διεργασιών, Βόλος, 3-5 Νοεμβρίου 1999
Φούντη Μ.Α. και Λασκαρίδης Κ.  “Βελτιστοποίηση Ενεργειακής Κατανάλωσης Σε Εγκαταστάσεις Διόγκωσης Περλίτη” 6ο Εθνικό Συνέδριο του Ι.Η.Τ., Βελτιστοποίηση Ενεργειακών Διεργασιών, Βόλος, 3-5 Νοεμβρίου 1999
Liakos, H.H, Founti M.A, and Markatos, N.C.  “Modelling of turbulent premixed flames in all combustion regimes” 2nd Meeting of the Combustion Institute (Greek Section), FORTH – CPERI, Thermi, Thessaloniki, 26-27 November 1999
Orfanoudakis, N., Founti, M. Krallis K., and Seirlis G.  “Investigation of the pressure cone and temperature field of the Fagot A/T missile system” 2nd Meeting of the Combustion Institute (Greek Section), FORTH – CPERI, Thermi, Thessaloniki, 26-27 November 1999
Keramida, E., Souris, N., Boudouvis, A., Founti M., and Markatos N.C.  “Numerical modeling of diffusion flames radiation attenuation by water mist” 2nd Meeting of the Combustion Institute (Greek Section), FORTH – CPERI, Thermi, Thessaloniki, 26-27 November 1999
Keramida, E.P., Liakos, H.H., Founti, M.A., Boudouvis A.G. and Markatos N.C. (1998) “Combustion chamber analysis coupled with radiation effects” Eurotherm Seminar No 56, Greece, April 1998
Klipfel, A. and Founti, M., (1998) “Numerical simulation of gas-particle flow coupled by momentum, turbulence and thermal effects in vertical industrial furnaces” 3rd International Conference on Multiphase Flow, Palais des Congres de Lyon, Lyon, France, June 8-12
Liakos, H.H., Founti, M. and Markatos, N.C. (1998)  “Modelling of an axisymmetric turbulent premixed flame under high pressure” 3rd National Congress on Computational Mechanics, Ioannina, Greece, Aug. 28-31
Liakos, H.H., Koukou, M.K., Founti, M. A. and Markatos N.C. (1998) “Modelling of impinging turbulent jets and premixed flames” accpeted for presentation at the 4th ECCOMAS Computational Fluid Dynamics Conference, Athens, Sept. 7-11
Liakos, H.H., Founti, M. and Markatos, N.C. (1998)  “Pressure effects in turbulent premixed flames” Eurotherm Seminar No. 61, Netherlands, October 1998
Founti Μ. and Klipfel Α. “Particle-induced erosion wear in axi-symmetric furnace configurations” Symposium on Erosion-Processes, ASME Fluids Engineering Division – Summer Μeeting, Washington DC, June 1998
Doukelis A., Mathioudakis K., Founti M., Papailiou, K. “3-D LDA Measurements in an Annular cascade for studying tip Clearance Effects” AGARD 90th PEP symposium on Advanced Non-intrusive Instrumentation for Propulsion Engines, Brusels , Belgium, Oct 20-24, 1997
Stamatelopoulos, G.N., Founti, M., Leithner, R. “Die Anwendung der exergooekonomischen Optimierung am Beispiel der Expansion von Perlit in industriellen oeffen”, “Optimierung und Validierung verfahrens-und energetischer Anlagen”  VDI-GET-Fachtagung Wirtschaftliche Waermenutzung in Industrie und Gewerbe, – VDI – Bericht 1296, oae.91-102, Braunschweig, 5./6. Mano?io 1997
Zaehringer, K., Klipfel, A., Martin, J.P., Petit, J.P. and Founti, M. “Experimental and computational investigation of vertical perlite expansion furnaces” Proc. 4th European conference on Industrial boilers and Furnaces, Portugal, 1-4 April, 1997
Klipfel, A., Founti , M., Zahringer, K., Martin, J.P., and Petit, J.P. “Numerical simulation and experimental validation of the turbulent combustion and perlite expansion processes in an industrial perlite expansion furnace” Proc. of 11th Symp. On Turbulent Shear Flows, Grenoble, September 8-10, 1997
Zaehringer, K., Petit, J.P., Martin, J.P., Klipfel, A., and Founti , M. “Etude experimental et modelisation numerique d’un four d’expansion pour des materiaux isolants d’origin minerale” Proc. 6e Congres Francais de Genie des Procedes, Paris, September 24-26, 1997
Achimastos, Th., Founti, M. and Paridis, Th. “Recent developments in non intrusive measuring techniques for particle velocity and size measurements” 2nd GR-I International Conference on New Laser Technologies and Applications, Ancient Olympia, Greece, June 1-4, 1997
Klipfel, Α., Liakos, Ch., Founti, Μ. and Markatos, Ν. “Εfficient modelling of a turbulent, pilot-stabilised flame” 1st Meeting of the Combustion Institute (Greek Section), Athens, Zappio Megaro, 28-29 November 1997
Klipfel, Α., and Founti, Μ. “Measurements and predictions in an industrial gas fired furnace” 1st Meeting of the Combustion Institute (Greek Section), Athens, Zappio Megaro, 28-29 November 1997
Founti, Μ. Orfanoudakis, N.G. and Krallis, K. (1997) ” A small diameter burner for a scale model experimental furnace” 1st Meeting of the Combustion Institute (Greek Section), Athens, Zappio Megaro, 28-29 November 1997
Founti M., Achimastos Th., Dimopoulos D., and Klipfel A. “Experimental Investigation Of Particle Motion In A Model Of A Beater Wheel Mill” Proc. of the 5th World Congress for Particle Technology, San Diego, Ca, USA, Vol. 5, pp. 401-410, 1996
Founti M., Achimastos Th. and Dimopoulos D. “Experimental Investigation and Visualisation of Particle Motion In A Model Of A Beater Wheel Mill” 8th International Symposium On Applications Of Laser Techniques To Fluid Mechanics, Lisbon, Portugal, 1996
Makris, P and Founti, M. “Constructional aspects of dry pulverizers for energy efficient production of powders” 5th World Congress of Chemical Engineering, Particle Technology Forum, San Diego, California, 1996
Makris, P., Nafpliotis, T. and M. Founti “A novel computational approach for the prediction of the size distribution of powders in terms of milling time” 2nd National Congress on Computational Mechanics, Crete, 1996
Makris, P., Nafpliotis, T. and Founti, M. “Development of a numerical method for the prediction of size distribution of powders in terms of milling time” 5th World Congress of Chemical Engineering, Particle Technology Forum, San Diego, California, 1996
Klipfel, A. and Founti, M. “Numerical Simulation of Particle-to-Particle Collisions in a Homogeneous Turbulent Shear Gas Flow” Proc. of the 8th Workshop on Two-Phase Flow Predictions, MVT, Martin-Luther-Univ. Halle-Wittenberg, Merseburg, Germany, 1996
Klipfel A., and Founti M. “Numerical Simulation of the “Delft flame” experiment 2nd Workshop on Aerodynamics of Steady-State Combustion Chambers And Furnaces” (ASCF-ERCOFTAC), ENEL-CRT, Pisa, Italy, November 28-29, 1996
Founti M. and Klipfel A. “Numerical Simulation Of Particle-To-Particle Collisions In Nearly Dense Liquid-Solid Flows” Numerical Methods for Multiphase Flows, ASME FED – Vol. 236, pp. 89-96, 1996
Founti M. and Klipfel A. “Numerical Simulation of Pneumatic Transport of Pulverised lignite and Induced Erosion Wear in the Distribution Ducts from the Mills to the Furnace Burners in Large Power Plants” Erosion Processes, ASME FED – Vol. 236, pp. 71-724, 1996
Founti M., Achimastos Th., Dimopoulos D., and Klipfel A. “Experimental Investigation Of Particle Motion In A Model Of A Beater Wheel Mill” Laser Anemometry & Experimental & Numerical Flow Visualization, ASME FED – Vol. 239, pp. 67-74, 1996
Doukelis, A., Founti, M., Mathioudakis, K. and Papailiou, K.D. “A three component laser Doppler anemometer for measurements in a turbomachinery annulus” EUROTHERM Seminar 46, Pisa, Italy, 3-4 July 1995
Founti M., Klipfel A. and Laskaridis K. “Rational energy use for the expansion of industrial minerals The case of perlite” Proc. of the Conference of the Greek Chemical Engineers Society, Athens, paper No 19, 1994
Achimastos Th., Dimopoulos D., Klipfel A. and Founti M. “Measurements and predictions in a vertical sudden expansion two-phase flow The effects of particle concentration” Proc. of the 7th Workshop on Two-Phase Flow Predictions, Erlangen, Germany, 1994
Klipfel A., Sommerfeld M. and Founti M. “The interparticle collision effects on the particle fluctuations in a homogeneous isotropic turbulence field” Proc. of the 7th Workshop on Two-Phase Flow Predictions, Erlangen, Germany, 1994
Doukelis, A., Founti, M., Mathioudakis, K. and Papailiou, K.D. “A general procedure for calculating and correcting the displacement of laser beams passing through plane and cylindrical windows using three cοmponent laser Doppler anemometry for turbomachinery applications”,  Proc. 7th Intern. Sympos. on application of laser Techniques to Fluid Mechanics, Portugal, July, 1994
Makris, P. and Founti, M. “Contribution to constructional and energy saving aspects in dry grinding of fine materials”,  Conference of the Panhellenic Union of Chemical Engineers Rational Use of Energy in the Process Industry, Athens, 1994
Founti M. and Klipfel A. “Investigation of mechanical erosion in fuel pipelines”,  83rd Symposium of the Propulsion and Energetics Panel of AGARD on Erosion, Corrosion and Foreign Object Damage Effects in Small Gas Turbines, Rotterdam, The Netherlands, 18, pp. 1-7, 1994
Founti A., Kakaras E., Klipfel A. and Giannakopoulos D. Influence of the coal transporting ducts shaping in the operation of pulverised coal furnaces,  Proc. of the 3rd Conference on Environmental Science and Technology, Mitilini, Greece, Vol. 2, pp. 543-554, 1993
Achimastos T., Dimopoulos D., Klipfel A. and Founti M. “Investigation of particle dispersion in an axisymmetric vertical two-phase sudden expansion flow”,  Proc. of the 5th Intern. Symposium on Refined Flow Modelling and Turbulence Measurements, Paris, pp. 465-475 , 1993
M. Founti, M. Sommerfeld and H.H. Qiu “Evaluation of optical methods for the measurement of particle-size distributions in multi-phase flows” Proc. of the  3rd National Congress of the Greek Society of Theoretical and Applied Mechanics, Athens, June, 1992
M. Founti, T. Berdi, E. Kakaras, A. Klipfel and Z. Ntouros “On the optimisation of expansion processes of industrial minerals”,  Proc. of the Intern. Conf. on Energy Efficiency in Process Technology, Elsevier Applied Science, Eds. P.A. Pilavachi, Athens, Greece, pp. 827-836, 19-22 Oct. 1992
M. Founti and G. Papaioannides “Influence of expansion ratio on the size of recirculation zone in two-phase sudden expansion flows”, Proc. of the 6th Intern. Symposium on Application of Laser Techniques to Fluid Mechanics, Lisbon, July, 1992
M. Founti, D. Giannakopoulos, S. Kardamakis, and A. Klipfel “Experimental and computational investigation of a vertical particle – laden sudden expansion flow”,  Proc. of the 1st National Congress on Computational Mechanics, Athens, Sept., 1992
Berdi and M.Founti “Particle-wall collisions in confined gas-particle flows”,  Proc. of the 1st National Congress on Computational Mechanics, Athens, Sept., 1992
Emm. Kakaras, Z. Douros, M. Founti and N. Papagergiou “Influence of the quality of Greek brown coals on the NΟx-SO2 emission from thermal power stations,  Proc. of the 1st Intern. Conference on Combustion Technologies for a Clean Environment, Portugal, 3-6 Sept., 1991
Μ. Φούντη “Επίδραση γεωμετρικώv στεvώσεωv στo πεδίo ταχυτήτωv αξισυμμετρικώv και επιπέδωv ρoώv”,  4o Παvελ. Υδρoτεχvικό Συvέδριo, Ελληvική Υδρoτεχvική Εvωση, Ηράκλειo, Κρήτη, 14-17 Μαρτίoυ, 1990
M. Founti and M. Sommmerfeld “Modelling of particle wall collisisions in confined gas-particle flows”  Proc. of the 5th Workshop on two-phase flow predictions, Univ. of Erlangen, W. Germany, edts. M. Sommerfeld, D. Wennerberg, 19-22 March, 1990
M. Founti and G. Papaioannides “Principles and applications of Laser Doppler anemometry”,  8th Panhellenic congress for Laser and applications, Heraclion, Crete, April 25th-27th , 1990
E. Kakaras, M. Founti and N. Papageorgiou “The effect of practice properties on radiative heat transfer”,  Proc. 70th Sympos. of the Propulsion and Energetics Panels, AGARD, paper No. 422, 1987